Saturday, April 1, 2017

CCIE v5 Lab Topology Using esxi, csr1000V and real switches



CCIE v5 Lab Topology using ESXI 5.5, CSR1000V, 4 X 3560, and 3750 Breakout Switches
Source: Cisco CCIE Routing and Switching v5.0 Configuration
               Practice Labs , Third Edition
8 Network Adapter Settings:





R1 to R6 – CSR1000V settings:

Breakout Switch Trunk ports Settings:

!
interface GigabitEthernet1/0/1
 switchport access vlan 34
 switchport mode dot1q-tunnel
 l2protocol-tunnel cdp
 l2protocol-tunnel stp
 l2protocol-tunnel vtp
 no cdp enable
!
interface GigabitEthernet1/0/2
 switchport access vlan 45
 switchport mode dot1q-tunnel
 l2protocol-tunnel cdp
 l2protocol-tunnel stp
 l2protocol-tunnel vtp
 no cdp enable
!
interface GigabitEthernet1/0/3
 switchport access vlan 46
 switchport mode dot1q-tunnel
 l2protocol-tunnel cdp
 l2protocol-tunnel stp
 l2protocol-tunnel vtp
 no cdp enable
!
interface GigabitEthernet1/0/4
 switchport access vlan 100
 switchport mode dot1q-tunnel
 l2protocol-tunnel cdp
 l2protocol-tunnel stp
 l2protocol-tunnel vtp
 no cdp enable
!
interface GigabitEthernet1/0/5
 switchport access vlan 132
 switchport mode dot1q-tunnel
 l2protocol-tunnel cdp
 l2protocol-tunnel stp
 l2protocol-tunnel vtp
 no cdp enable
!
interface GigabitEthernet1/0/6
 switchport access vlan 200
 switchport mode dot1q-tunnel
 l2protocol-tunnel cdp
 l2protocol-tunnel stp
 l2protocol-tunnel vtp
 no cdp enable
!
interface GigabitEthernet1/0/7
 switchport access vlan 300
 switchport mode dot1q-tunnel
 l2protocol-tunnel cdp
 l2protocol-tunnel stp
 l2protocol-tunnel vtp
 no cdp enable
!
interface GigabitEthernet1/0/8
 switchport mode dot1q-tunnel
 l2protocol-tunnel cdp
 l2protocol-tunnel stp
 l2protocol-tunnel vtp
 no cdp enable